Help
Open the Studio, draw, then choose a machine profile in the CNC panel and tap Preview & G-code. Review the toolpath and the validation result, then download.
Pen, line, rectangle, circle, ellipse, polyline, eraser (whole stroke or part of a stroke) and select. With a selection you can move, resize, rotate, duplicate, group, reorder and reverse strokes, or edit individual points.
V select, P pen, L line, R rectangle, C circle, O ellipse, N polyline, E eraser. Ctrl+Z undo, Ctrl+Y redo, Ctrl+D duplicate, Ctrl+A select all, Ctrl+S save, Delete remove, arrow keys nudge (Shift = 10 mm), hold Space to pan.
Draw with one finger or a pen. Pinch to zoom and drag with two fingers to pan. With palm rejection on, touches are ignored while a pen is active.
It decides where machine X0/Y0 sits relative to your drawing (bottom-left, top-left or centre). The work offset is a separate shift added afterwards.
Machine-ready export is blocked while validation reports errors, such as moves outside the travel limits, a safe Z that is not above the working Z, feeds above the machine maximum, or commands the controller does not support. Fix the listed issues and regenerate.
Everything is autosaved on this device. Signed-in users are also saved to their account; if a newer version exists on the server you choose which one to keep.
Yes. After the first visit the drawing studio loads offline and drafts are kept on the device. Generating G-code needs a connection to the server.
Always test safely. Run the G-code in a simulator and do a dry run with the tool raised before cutting or drawing on real material.